How to install a fence at home?

Are you the one who likes to be independent no matter what kind of job is it all about? If yes, then we have got you an ultimate solution, studying which you no longer have to be dependent on the fence installation companies.
Though fence installation might look like a dreary task to be conducted at home with us you’ll find it as easy as installing an app on the phone.

Note, if still, you feel to consult an experienced fencing expert then without a second thought you may contact the A Plus Fence Company to help you out. We assure to help you in any way.

7 easy way for fence installation

Step 1: Check for any rules & regulations

Before installing the fence in your property it is very significant to check for any rules and regulations related to fence installation.

Installing a fence without the required approval might get you in an unpleasant situation where to may have to re-install the entire fence system or remove it permanently.

Often some cities or localities have some certain rules about fences which every person is obliged to follow. So check out for any such restrictions and then move forward in the fence building and installation process.

Step 2: Gather the materials

At first choose your fence, which fence type and style you desire to install. Next, gather the required materials such as masonry concrete, bricks, nails, screws, hammer, saw, safety gloves & eye protector.

Step 3: Dig post holes

Decide where you want to install the fence system and then accordingly dig the post holes.

The basic rule to dig the post is each post must be 8 feet or 2.4 meters distant from the center to center. Mark all the spacing between the posts then accurately dig the post holes. Remember, each post hole must be 1/3 or ¼ in depth.

Step 4: Put some gravels (Optional)

Placing some gravels inside the post holes before placing the posts ensures you an error-free drainage system but you find it a bit burden full then may also skip this step.

Step 5: Place the posts

Use 4X4 posts to do this job. Place the posts in the holes and then secure them with quick-set concrete.

If at any point in time you feel to have a helping hand beside you then you may feel free to contact the A Plus Fence Company anytime and the expert advice in no less time.

Step 6: Attach the rails

What is the Rail?

Rails are basically steel or iron bars that are attached to the main boards of the fence usually on the top and bottom in horizontal alignment.

Take 1X4 sized rail frames and attach them to the posts on both sides, from both the front and backside using screws and nails.

Step 7: Attach the fence stacks

Use 1-inch stacks to both the sides of the fence, inside and outside using 2 inches nails or screws. Make sure to leave even gaps between each stack and then finally add some finishing touches to the fence by applying a cost of paint or decorative.

If you have any doubts related to the fence installation then you may drop them below in the comment section and we’ll get back to you.

To get a more detailed summary, stay connected to our posts or you may also visit the A Plus Fence Company blogs and get all your fence-related queries solved.